Seed element JPH, towed, small seeds (min 15cm between rows)

The JPH is a vegetable seed drill designed for sowing small seeds. It consists of independent seeding units to be attached to a hitch bar, which can be connected to a tiller, a tractor, or a micro-tractor. This seed drill is suitable for all types of terrain for seeding an area up to 5 ha/day and is modular from 1 row/unit up to a working width of 3m, with a minimum inter-row spacing of 18cm. A spring system ensures good ground pressure for the seeding units.
The hitch bar is graduated every 5mm to precisely adjust the row spacing.

Operation is based on seed selection rollers (not included), placed at the bottom of the hopper.
The spacing between seeds in the row is fully adjustable: 6 pinions are provided as standard for chain drive adjustment. By interchanging the pinions, you have 11 possible combinations. You can sow in lines, in groups, or seed by seed.

The angle of the covering scraper can be adjusted for furrow closure adjustment, and the height of the share is adjustable by a simple bolt for seeding depth adjustment.

Note: This range of seeders uses a seed distribution system by roller (not provided). It is necessary to obtain the rollers corresponding to your crops. For multi-row seeders, one roller is required per hopper.

The accessories and options available for this model are:

Hopper extension (increased capacity up to 3L)
Splitting shares for sowing in beds and for seed distribution over a wider row (60/75/120mm)
Double row share (to double each sown row with a row spacing of 45mm)
Opening disc share (for heavy, rocky soils, or soils with a lot of residue)
Presentation stands with wheels for parking
Narrow metal rear wheel for closing sown rows with more force
Hitch bars (thickness 5x5cm and width 50/150/300cm)
Tiller hitch
3-point micro-tractor hitch Cat 1
3-point tractor hitch Cat 2
Depth control wheels or gauge wheels
Granule distributor (per element/row)
Drive system for the granule distributor